Musketonhaak in vernikkelde uitvoering, Lengte 66 mm, voorzien van ovaal oog van ca. 13mm.
Opening ca. 8 mm.
Handig voor het vastzetten van accessoires aan beschikbare D ogen.

Karabijnhaak 40 mm zwart verzinkt 
Specificaties: * Materiaal - normaal staal -  zwart verzinkt. * l - 40 mm.  SWL - 60 kg - 8 gram per stuk

Afbeelding kan afwijken van het orgineel

Karabijnhaak 50 mm zwart verzinkt 
Specificaties: * Materiaal - normaal staal -  zwart verzinkt. * l - 50 mm.  SWL - 70 kg - 16 gram per stuk

Sturdy inflatable floater for belly boat. With this insert you can easily increase the comfort and seat height in the belly boat.
Applicable for most common PVC bellyboating. Has 1 air chamber.
Material: 1.1 mm PVC with safety valve - Color: Light grey.

The bottom is provided on two sides with Velcro bottom for attachment in the boat and top for attachment of 
our session.

(Without inflatable PVC seat - the seat is available separately).
 

Glue eye for rope/line or carabiner. approx. diameter 80 mm. Also up to diameter 12mm.
To be glued to PVC with PVC glue. 
Color: Black. Material: PVC.

Adapter voor het aansluiten van een pomp op de Belly boot. Het koppelstuk is voorzien van een bajonet, welke in het ventiel te fixeren is, door een kwartslag te draaien na het inbrengen. 
Andere zijde voorzien van slangtule met diameter ca. 17 en 21 mm. 

1-Component dinghy / PVC adhesive - specially designed for RIBs and BBs.

Easy to process, because it only consists of 1 component. For repairs and assembly of small parts.
- Surface sanding
- Double-sided lubrication
- Allow to dry for 10-20 minutes
- Lubricate again on both sides
- Allow to dry for another 10-20 minutes
- Squeezing parts and keeping them compressed 
- Fully cured after 48 hours

 

Ventielsleutel voor het los- en/of vastdraaien van de veiligheidsventielen van de Belly Boot. 
Kunststof sleutel. Geschikt voor de meest gangbare ventielen van BB's en RIB's.

Sturdy inflatable seat with 2 connected air chambers for belly boat. 
High seating comfort and increase of the seat in the Bellyboot due to increased buoyancy.
The seat with 2 air chambers and safety valve also offers extra safety.
The seat is equipped with two adjustable straps to set the correct seating area. 
Material: 1.1 mm PVC with safety valve - Colour: black/grey.
Suitable in the most common PVC belly boats such as: Berkley, Savage Gear and Madcat.
LxB seat: 45x49cm and backrest height approx. 53cm.

The seat is equipped with Velcro at the bottom.

(Without inflatable PVC floater bottom - bottom is available separately).  
Please note! Safety valves can be inflated with a special pump adapter.


 

Rod or mast rest. This support is equipped with a glue pad and can be applied to a PVC boat with special glue.
The support can be used for a rod or for a short mast for e.g. a flag or a top light. 


 

Rod rest with glue pad. Rod rest can be set in a rotation angle position by means of a star and secured. 
The front of the support can be opened and closed with a flexible rotating ring. Sturdy and 
Stable plastic design. (glue not included)
 

Reserve veiligheidsventiel d=28mm / D=37 mm. voor Belly-Boot 12BB.
 

Prachtig Collectors item - 12BB Muts of Cap!!
* Speciale prijs voor de complete set!!

 

Tube bag in luxury version - stable bag even if empty for all Belly-Boats. 
Mounting by Velcro on the bottom and on the short side 2x fast clips
to secure to the D-rings on the tube. Price per piece.
 

Spanband met kunststof karabijnhaakclip
Straplengte ca. 70cm met 2x karabijnhaakclip in kunststof
met lengteverstelling

Draagband met schouderpads en kunststof Karabijnhaakclips
Luxe draagband voor belly boot met schouderpad en kunststof bevestigingsclips

Direct Leverbaar

heavy inflatable seat with 2 connected air chambers for belly boat. 
High seating comfort and increase of the seat in the Bellyboot due to increased buoyancy.
The seat with 2 air chambers and safety valve also offers extra safety.
The seat is equipped with two adjustable straps to set the correct seating area. 
Material: 1.1 mm PVC with safety valve - Color: black
Suitable for the most common belly boats such as: Berkley, Savage Gear and Madcat
LxB seat: 45x49cm and backrest height approx. 53cm

The bottom is provided with Velcro at the bottom.

(Without inflatable PVC floater bottom - bottom is available separately).  
Please note! Safety valves can be inflated with a special pump adapter.
 

Sturdy standard inflatable bottom for belly boat. With this insert you can easily increase the comfort and seat height in the belly boat.
Applicable for most common PVC bellyboating. Has 1 air chamber.
Material: 1.2 mm PVC with safety valve - Color: Black.

Size: LxW 100x49cm suitable for most common 170cm belly boats such as: 12bb Stealth and Phantom

The bottom is provided on two sides with Velcro bottom for attachment in the boat and top for attachment of our seats.
 

12BB Belly Boat, type STEALTH NP is a "Special Edition" "Customized" high end Belly Boat and with it a very sturdy and stable
belly boat made of strong PVC with a material thickness of 1.2 mm. The Belly Boat is equipped with an inflatable seat
and an extra inflatable bottom for a high sturdy seat.
This makes the BB very good to use even in cold weather and under the toughest conditions. 

Furthermore, the Belly Boat is equipped with oars and two storage bags on both tubes with fast-confirming clips, a stabilization rod,
deck net with measuring tape (the stabilization rod ensures that the tubes are kept widest, so that there is always enough room to move)
and a luggage just behind the seat.
The boat is inflatable via 2 uneven air chambers, and equipped with safety valves.
The seat and bottom both have their own valve, so the BB is eventually equipped with 4 air chambers for extra safety.

Carrying capacity of the 12BB.eu Belly Boats is the highest of the V-shaped Belly Boats currently available on the market.
The carrying capacity of the 12BB, type STEALTH is approx.  200KG. 

The D-rings are well secured with extra patches, the points are reinforced so that the BB can
be put upright without risk of damage and the entire boat is equipped with an extra bumper. 

Color 12BB Belly Boat, type STEALTH NP - Black
Size Belly Boat - approx. 170x116 cm
Weight - 13.9 KG

BB is supplied incl. pump with special filling valve, rear luggage net,
front net with spreader bar, handles bow and inside tubes,
bumper all around, bumper at the bottom BB and carrying bag. 
Incl. inflatable bottom and seat.


 

Sturdy standard inflatable bottom for belly boat. With this insert you can easily increase the comfort and seat height in the belly boat.
Applicable for most smaller common PVC bellyboats. Has 1 air chamber.
Material: 1.1 mm PVC with safety valve - Color: Black.

LxW 90x49cm suitable for smaller belly boats: 150/160cm.

The bottom is provided with Velcro on two sides.
 

	Product name	Price	Order
	12BB - Seat Grey - Standard - 45x49cm - 1 Valve	€ -

Large spacious sturdy carrying case, for all BB parts, pump, flippers, life jacket etc.
All in 1 large XXL bag. Color black with handles.

Capacity: 200Liter
Length x width x height: 95x35x60cm.

Footpump for the Floattube or dinghy.

Pump is equipped with bayonet connector D=20 mm.
And has a capacity of 3 liters

Suitable for most common Floattubes and inflatable boats.

12BB Belly Boat, type STEALTH NP is a "Special Edition" "Customized" high end Belly Boat and with it a very sturdy and stable
belly boat made of strong PVC with a material thickness of 1.2 mm. The Belly Boat is equipped with an inflatable seat
and an extra inflatable bottom for a high sturdy seat.
This makes the BB very good to use even in cold weather and under the toughest conditions. 

Furthermore, the Belly Boat is equipped with two storage bags on both tubes with fast-confirming clips, a stabilization rod,
deck net with measuring tape (the stabilization rod ensures that the tubes are kept widest, so that there is always enough room to move)
and a luggage just behind the seat.
The boat is inflatable via 2 uneven air chambers, and equipped with safety valves.
The seat and bottom both have their own valve, so the BB is eventually equipped with 4 air chambers for extra safety.

Carrying capacity of the 12BB.eu Belly Boats is the highest of the V-shaped Belly Boats currently available on the market.
The carrying capacity of the 12BB, type STEALTH is approx.  200KG. 

The D-rings are well secured with extra patches, the points are reinforced so that the BB can
be put upright without risk of damage and the entire boat is equipped with an extra bumper. 

Color 12BB Belly Boat, type STEALTH NP - Black
Size Belly Boat - approx. 170x116 cm
Weight - 13.9 KG

BB is supplied incl. pump with special filling valve, rear luggage net,
front net with spreader bar, handles bow and inside tubes,
bumper all around, bumper at the bottom BB and carrying bag. 
Incl. inflatable bottom and seat.


 

Veiligheidskoord - Hengel / BB accessoires
Veiligheidskoord - geplastificeerd min. lengte 25cm / max. lengte ca. 150cm. - voorzien van Muskaton haakjes met D= ca. 8 mm. (St.37). 

Gluepatch / round with steel D-Ring
PVC Glue Patch with D-ring. 
For attaching e.g. luggage net / front net.
Color: Black - ring steel polished. 

Prachtig Collectors item - 12BB.eu Long Sleeve!!
Gemaakt van luchtig 160grs. Polyester. 

Verkrijgbaar in de maten M, L en XL.

* Vraag naar de beschikbaarheid van de verschillende maten om terleurstelling te voorkomen!
   (Maat XL en L voldoende op voorraad momenteel)

Gluepad / Paddle Holder or Wheel Set 25-30mm
Gluepad with clamp for a tube 25-30mm. Excl. glue, which can be found in our Webshop.
Gluepad in black plastic.

Please note! Shape may vary. Rectangular or oval version. 
 

Gluepad / front bar holder
Gluepad for Spreader rod or motor mount (hole diameter d=20 mm). 
Gluepad square approx. 10x10 cm. Made of black plastic

Tube bag / Luxury - XL
Luxury Tube bag in XL size. LxWxH = approx. 55x20x 15cm. Equipped with Inner lining for Stable version even if the bag is empty. 
The bag is equipped with a solid double zipper, which is reinforced at the end of the Zipper to prevent overrunning. Further provided
of Front carrying handle and resealable with extra wide Velcro. The Tube bag is attached with four Buckles to the
along the side of the bag. The Carrying Bag is equipped with the buckles male. 
Female buckles sold seperatly in our shop
 

12BB Belly Boat, type STEALTH SE - "Totally Black" is a "Special Edition" high end Belly Boat and with it a very sturdy and
stable belly boat made of strong PVC with a material thickness of 1.2 mm. The Belly Boat is equipped with an inflatable seat
and an extra inflatable bottom for a high sturdy seat.
This makes the BB very good to use even in cold weather and under the toughest conditions.

This STEALTH SE Special Edition "Totally Black" features black Accessories, as well as even completely
matte black 12BB.eu Logos. This type of Stealth is also a "Limited Edition".

Furthermore, the Belly Boat is equipped with paddles with locking clips, two storage bags on both tubes,
a stabilization rod, deck net with measuring tape (the stabilization rod ensures that the tubes are kept widest,
so there is always enough room to move) and a luggage just behind the seat.
The boat is inflatable via 2 uneven air chambers, and equipped with safety valves.
The seat and bottom both have their own valve, so the BB is eventually equipped with 4 air chambers for extra safety.

Carrying capacity of the 12BB.eu Belly Boats is the highest of the V-shaped Belly Boats
currently available on the market. The carrying capacity of the 12BB, type STEALTH is approx. 200KG. 

The D-rings are well secured with extra patches, the points are reinforced so that the BB
can be put upright without risk of damage and the entire boat is equipped with an extra bumper. 

Kleur 12BB Belly Boat, type STEALTH - Zwart
Accessoires - Zwart incl. 12BB.eu Logo
Afmeting Belly Boat - 170x125cm
Gewicht - 14,8 KG

BB wordt geleverd incl. pomp met speciaal vulventiel en draagtas. 
Incl. opblaasbare bodem en zitting.
 

Scotty Glue-on Pad for inflatable Boats - Black

Scotty Gear Head mount extender

Scotty Combination Side/Deck mount

Scotty Combination Side/Deck mount Lock

Scotty Kayak/sup Transducer arm.
Word geleverd inclusief Slip discs  en Side/Deck mount met lock.

Scotty Baitboard, excl. toebehoren 

Scotty Slip Disk set

Scotty Fishfinder mount for Lowrance/Eagle with block mount

Scotty mini Double Ended Rod Holder Height Extender - short

Scotty Double Ended rod holder Height extender - long

Scotty Gear Head Adapter.
Voor het verlengen of aanpassen positie van bijv hengelsteun.

Scotty Ball Mounting with sice/deckmount

Scotty Rod holder - power Lock with side / deck mount

12BB.eu Motor Mount for Electric Motor / Steel Coated 
Steel mounting bracket with coated wooden mirror for mounting an electric motor. 
The Mounting Bracket is stably attached with 4 Glue Pads. The mounting bracket can be used in this
slid when the Belly-Boot is slightly let off. 

The Mounting Bracket is supplied including the 4 required Glue Pads for mounting on the bow of the
belly boat. 

Attaching the Pads is easy to perform yourself. Glue not included - see elsewhere in the webshop
1 tube is enough for attaching the pads.

Fits most PVC belly boats with V-bow and tubes of approx. 32cm. 
Such as: 12bb Stealth, Phantom, Falcon and Green hornet.
And other brands such as: Berkley, savage gear and Madcat

(Photo instructions for assembly are available on request).
 

12BB.eu Motor Mount for Electric Motor / Stainles steel Coated 
Stainles steel mounting bracket with coated wooden mirror for mounting an electric motor. 
The Mounting Bracket is stably attached with 4 Glue Pads. The mounting bracket can be used in this
slid when the Belly-Boot is slightly let off. 

The Mounting Bracket is supplied including the 4 required Glue Pads for mounting on the bow of the
belly boat. 

Attaching the Pads is easy to perform yourself. Glue not included - see elsewhere in the webshop
1 tube is enough for attaching the pads.

Fits most PVC belly boats with V-bow and tubes of approx. 32cm. 
Such as: 12bb Stealth, Phantom, Falcon and Green hornet.
And other brands such as: Berkley, savage gear and Madcat

(Photo instructions for assembly are available on request).
 

Mac Fishing Zwemvliezen / vinnen voor de Belly Boot (SET / 2 Stuks)

Mac Fishing extra lange vinnen / flippers, uitermate geschikt voor de belly boot, voor afstanden, snelheid en met behoud van de wendbaarheid.
Voorzien van verstelbare rubberen straps, voorzien van snelclip. Maat XL/XXL met brede instap geschikt voor vrijwel alle gangbare laarsformaten.

Reserve rubberen straps, beschikbaar in de webshop (12BB.eu straps incl. clips zijn hiervoor te gebruiken) 

 

12BB.eu Bellyboat Zwemvliezen / vinnen voor de Belly Boot

12BB.eu extra lange vinnen / flippers, uitermate geschikt voor de belly boat, voor afstanden, snelheid en met behoud van de wendbaarheid.
Voorzien van verstelbare rubberen straps, voorzien van snelclip. Maat XL/XXL met brede instap geschikt voor vrijwel alle gangbare laarsformaten.
(Laarsformaat 41-45)

Reserve rubberen straps, beschikbaar in de webshop (12BB.eu straps incl. clips zijn hiervoor te gebruiken), ook beschikbaar met RVS straps.

 

Scotty Fishfinder mount - Universeel zonder Deck mount. 
 

Scotty mount straps voor montage van diverse items op de floattube.
 

Scotty Stick on D-Ring mount.
 

Scotty - Stick on Mount Gear - 3"
 

Scotty Rod holder - power Lock with side / deck mount

Scotty Cup holder inclusief gunnel mount voor montage op bait board.
En oar lock adapter voor montage op deckmount.

Scotty - Oar Lock Adapter
Prijs / stuk

12BB.eu Universal Oar Set for the Belly Boat
Oar set consisting of 2 divisible oars, two belt pads and 2 clamp holders for 
the paddles. 
The belt pads and clamp holders are glue pads and are easy to apply with 1- or 2-component glue. 
The oars and holders are made of black (plastic can always differ slightly in color). Paddles are divisible and
made of aluminium and plastic. 


 

Luggage just in standard version suitable for 12BB.eu Stealth or similar belly boats.
Dimensions: Short side top: 40cm. Wide side below: 60cm. Height: 38cm.



 

DPD - Verpakkings- en transportkosten (B) / DPD - Verpackungs- und Versandkosten (DE)
 

DPD - Transport- en verpakkingskosten (NL)
 

2-Component inflatable boat / PVC adhesive - specially designed for RIBs and BBs.

To be processed, by mixing 2-components with the right ratio - see packaging. For repairs and assembly of small parts.
- Surface sanding
- Double-sided lubrication
- Allow to dry for 10-20 minutes
- Both say heat with a hair dryer
  (!! keep moving, so that no burning can occur!!)
- Squeezing parts and keeping them compressed 
- Fully cured after 48 hours

 

Hengelsteun (3-voudig) - standaard (Zwart)
3-Voudige hengelsteun voor het verticaal plaatsen van hengels tijdens transport of als standby.
Standaard voorzien van 4 schroefgaten voor schroefmontage. 
De hengelsteuntubes zijn voorzien van molensteun gleuven voor meer stabiliteit.
 

Softshell jack - Zwart met 12BB.eu logo (zeefdruk transfer) op de borst.
94% Polyester / 6% Spandex, 340 g/m. 

Scotty Plug met Tandradaansluiting voor alle verlengstukken en hengelsteunen.
 

Standard front bar suitable for most common bellyboats.
Length of the bar: approx. 82cm. Length from point to point approx. 86cm
Comes without glue pads.
 

Hengelsteun (3-voudig) - MVS / Bellybootsteun zonder Scotty deckmount en gluepad
(Los bij te bestellen)
3-Voudige hengelsteun voor het verticaal plaatsen van hengels tijdens transport of als standby.
Standaard voorzien van 4 schroefgaten voor schroefmontage. Incl. RVS montageplaten 1x voor
montage Scotty plug (inbegrepen/gemonteerd), 1x voor extra stabilliteit en rubbere afstandhouders
t.o.v. de floattube. RVS Montageplaten onbehandeld.
De hengelsteuntubes zijn voorzien van molensteun gleuven voor meer stabiliteit.
 
De 3-voudige hengelsteun is uitgevoerd met Scotty plug voor montage op de 
bellyboot. Hoek plug met pad is ca. 40graden. Voor montage op de wang van de tube aan de
voorzijde/zijkant. Aansluiting type Scotty Deckmount + Gluepad (niet inbegrepen - los bij bestellen)
- Zie Webshop bij Scotty onderdelen.
 

	Product name	Price	Order
	Scotty Combination Side / Deck Mount with Lock	€ -
	Scotty Glue Pad - Black	€ -
	PVC Glue - 1-component	€ -
	PVC Glue - 2-component (2K) - 125ML	€ -

12BB.eu Sweatvest, Zwart met 12BB.eu Logo, zeefdruk, 70% Katoen / 30% Polyester, 280 g/m2. 

Montageplaten voor Hengelsteun 3-Voudig (tubes), Incl. Scotty Plug voor aansluiting in Scotty Deckmount.
Excl. Tubes (3-voudige hengesteun), deckmount en gluepad.
1x Montageplaat voor montage aan Scotty deckmount / 1x Montageplaat met ruber afstandhouders t.o.v. de float
tube. Gatafstand - L=180 mm. 
 

	Product name	Price	Order
	Scotty Combination Side / Deck Mount with Lock	€ -
	Scotty Glue Pad - Black	€ -
	Hengelsteun (3-Voudig) - standaard (3-tube)	€ -
	PVC Glue - 1-component	€ -
	PVC Glue - 2-component (2K) - 125ML	€ -

Flexible arm with standard size thread for mounting GoPro or Camera.
Ideal for taking beautiful photos or film while fishing.
Compatible with Scotty, Fasten and Railblaza

Supplied without deckmount and glue pad.

	Product name	Price	Order
	Scotty Combination Side / Deck Mount with Lock	€ -
	Scotty Glue Pad - Black	€ -
	PVC Glue - 1-component	€ -
	PVC Glue - 2-component (2K) - 125ML	€ -

12BB Belly Boat, type BLACK FALCON is a nice stable belly boat made of strong PVC with a material thickness of 0.9 mm.
The Belly Boat is equipped with an inflatable seat and an extra inflatable bottom for a high sturdy seat.
This makes the BB very good to use even in cold weather.
Furthermore, the Belly Boat is equipped with two storage bags on both tubes with Velcro and clip attachment,
a stabilization rod deck and measuring tape (the stabilization rod ensures that the tubes are kept widest, so there is always enough room to move).
The boat is inflatable via 2 uneven air chambers, and equipped with safety valves.
The seat and bottom have their own valve, so the BB is eventually equipped with 4 air chambers for extra safety.
Carrying capacity of the 12BB.eu Belly Boats is the highest of the V-Shape Belly Boats currently available on the market.
The load capacity of the 12BB, type BLACK FALCON is approx. 160KG.

The D-rings are well secured with extra patches, the points are reinforced so that the BB can be put upright
without risk of damage and the entire boat is equipped with an extra bumper.

Color 12BB Belly Boat - Black
Color Accessories - black (bags, seat, stabilization bar, clips, etc).
Size Belly Boat - approx. 155x116 cm
Weight - 10,8KG

BB is supplied incl. pump with special filling valve.
Incl. inflatable seat, incl. inflatable bottom. front net and luggage net behind the seat, 
handles on the inside tubes, extra bumper all around, extra bumper underneath.
Stable PVC FloatTube bags


 

12BB.eu Bellyboat Zwemvliez / vin voor de Belly Boot

12BB.eu extra lange vin / flipper, uitermate geschikt voor de belly boat, voor afstanden, snelheid en met behoud van de wendbaarheid.
Voorzien van verstelbare rubberen straps, voorzien van snelclip. Maat XL/XXL met brede instap geschikt voor vrijwel alle gangbare laarsformaten.
(Laarsformaat 41-45)

Reserve rubberen straps, beschikbaar in de webshop (12BB.eu straps incl. clips zijn hiervoor te gebruiken), ook beschikbaar met RVS straps.

 

Tube bag / Luxury - XLm
Luxury Tube bag in XLm format. LxWxH = approx. 47x25x18cm. Equipped with extra strength for stable execution even when the bag is empty. 
The bag is equipped with a solid double zipper, which is reinforced at the end of the zipper to prevent overrunning. Further provided
of Carrying handle at the front and shoulder strap at the top. The Tube bag is attached with 2 clips on the ends and Velcro
on the underside. These bags are 1:1 interchangeable with the standard or Luxury 12BB.eu bags on the Belly Boot. 
The Clips on the bottom are adjustable, so that they can also be placed on other belly boats with D-Rings. Min. distance between the clips 
is approx. 30 cm. maximum distance approx. 75cm.

Furthermore, the bag is equipped with 2 extra side pockets (lockable with zipper) and a front pocket (lockable with Velcro). On top is an elastic
just for storing larger items. In short, versatile and very user-friendly bag. 
 

Sturdy inflatable seat with 2 connected air chambers for belly boat.
High seating comfort and increase of the seat in the Bellyboot due to increased buoyancy.
The seat with 2 air chambers and safety valve also offers extra safety.
The seat is equipped with two adjustable straps to set the correct seating area. 
Material: 1.1 mm PVC with safety valve - Color: black
Special developments for the narrower belly boats such as Floatmaster 
LxW seat: 44x44cm , height Backrest: 44cm

(Without inflatable PVC floater bottom - bottom is available separately).  
Please note! Safety valves can be inflated with a special pump adapter.

 

Quick Release Magneet - 3,5kg
Magneetsluiting voorzien van aluminium karabijnhaak en 2 sleutelringen - trekkracht ca. 3,5kg.
Totale lengte ca. 10cm. 

Mounting Glue Pad 
Price per Mounting Glue Pad incl. Glue (excl. pad). 
Only possible in combination with 12BB.eu belly boot. 

Please note! We have to schedule the installation of pads, the delivery time
resp. lead time for delivery will then be 1-2 weeks. 
 

Deze Scotty Gear-Head track Adapter is met alle Scotty accessoires te combineren. 

 

Mounting plate for fin underneath your bellyboat.

 

De Navionics binnenwaterkaart Nederland is de electronische binnenwaterkaart voor Nederland van Navionics. Deze voorgeprogrammeerde waterkaart dekt niet alleen het binnenwater van Nederland de de Nederlandse kust inclusief de waddeneilanden af maar pakt de gehele Benelux en ook nog een gedeelte van West-Duitsland. Op de foto's ziet u waar de kaartgrens loopt.
Deze kaart word geleverd op een micro SD met SD kaartadapter. Zo past deze binnenwaterkaart Nederland Nav+ Regular EU76R Benelux altijd in een SD kaart slot, of het nu een micro SD of een standaard SD formaat betreft. Deze navionics binnenwaterkaart Nederland is niet meer verkrijgbaar op CF (compact flash)

Wanneer u de kaart in huis heeft kunt u de kaart aanmelden bij Navionics. U heeft dan vanaf een jaar na aankoop recht op gratis updates van deze binnenwaterenkaart.
Handig is bijvoorbeeld om deze kaart nog even te updaten voor u op vakantie gaat of een lange tocht gaat maken.

Let op! Wanneer u een oudere kaartplotter heeft is het zeker aan te bevelen om de Navionics compatibiliteitslijst na te kijken of deze kaart geschikt is voor uw kaartplotte

 Vinnen 12BB.eu - Vin/strap Borgingselastieken
Elastiek met haak voor eenvoudige snelle montage.
Prijs per stuk. 2 Stuks nodig per vin. 
 

Scotty Rod holder - Fly fishing / Hengelsteun voor vlieghengel met deckmount 
 

Scotty Hengelsteun - Rocketelauncher
Perfecte steun voor het opbergen van je tweede en/of derde hengel inplaats van een 3-tube hengelsteun. 
of voor het trollen vanuit de Belly Boot. 
 

Scotty Portable Camera Mount. Excl Deckmount

DPD-Verzendkosten gereduceerd / Buitenland
 

Mounting Mirror / gluing 4 pad + removing rubber edge for application pads + gluing.
incl. glue (excl. pads and mirror). 
Only possible in combination with 12BB.eu belly boot. 

Please note! We have to schedule the installation of pads, the delivery time
resp. lead time for delivery will then be 1-2 weeks. 

 

BTW-Correctie Bedrijven / BE
BTW 0,0% / BTWNR. BE0702399170

 

Mounting Floatplus system. Cable on the outside.

Please note! We have to schedule the installation of pads, the delivery time
resp. lead time for delivery will then be 1-2 weeks. 
 

Scotty 365graden rondschijnend licht. Op mast met ball mount excl. deckmount.
Lamp werkt op batterijen. 
Top licht 365 rondschijnent Wit licht. Excl. deckmount. 
Past direct in separate Scotty deckmount, gearhead of in trackadapter.  
Prima lamp! Veilige verlichting op het water. 
 

12BB.eu Bellyboat Flippers / fins for the Belly Boat - incl. stainless steel spring Straps and stainless steel clips

12BB.eu extra long fins / flippers, extremely suitable for the belly boat, for distances, speed and while maintaining manoeuvrability.
Size XL/XXL with wide entry suitable for almost all common boot sizes. (Boot size 41-45) with stainless steel straps up to Boot size 47.

Incl. 1 set of stainless steel straps (self-assembled) 

 

Hengelsteun (3-voudig) - Type PVS / Bellybootsteun, incl. Scotty Earlock plug / deckmount
met lock en gluepad
3-Voudige hengelsteun voor het verticaal plaatsen van hengels tijdens transport of als standby.
Standaard voorzien van 4 schroefgaten voor schroefmontage. Incl. RVS montageplaten 1x voor
montage Scotty plug (inbegrepen/gemonteerd), 1x voor extra stabilliteit en rubbere afstandhouders
t.o.v. de floattube. RVS Montageplaten onbehandeld.                                            
De hengelsteuntubes zijn voorzien van molensteun gleuven voor meer stabiliteit.
 
De 3-voudige hengelsteun is uitgevoerd met Scotty plug voor montage op de 
bellyboot. Hoek plug met pad is ca. 45graden. Voor montage op de wang van de tube aan de
voorzijde/zijkant. Montage met  Scotty Deckmount met lock + Gluepad, deze zijn inclusief in
deze combi.
                                    
      

Reserve RVS veer Strap, incl. RVS clips met boutborging t.b.v. 12BB.eu Vin - Long Fin Zwemvlies of anders (universeel). 
Prijs per Set. 

 

Scotty Kayak/sup Transducer arm. Met schroefmontage!! voor montage op Baitboard of direct op de hard kunststof boot. 
Incl. extra gearhead. 
 

12BB.eu / Flexible handle made of thick PVC, equipped with two adhesive patches.
Easy to attach to a boat or bellyboot by means of. special soft PVC glue. See elsewhere
in the shop. 
Handles in Black. The handles are per piece. 

 

Mounting Paddles 
Mounting the Paddles incl. - 2 C-pads for securing the paddles to the side of the Belly Boot. 
incl. glue (excl. pads). 
Only possible in combination with 12BB.eu belly boot. 

Please note! We have to schedule the installation of pads, the delivery time
resp. lead time for delivery will then be 1-2 weeks. 


 

Front net - for frontbar with tape measure. 
Front net with raised edges with 2 clips, for quick mounting on
e.g. 2 D-rings (not included). 
The fontnet is equipped with a loop, allowing the frontbar of the belly boat
going through. (Frontbar not included). Size: 29x73cm
Net is suitable for Stealth (170cm), Falcon (160cm) or Hornet (150cm) Belly
boat. Front rod length (hoh) approx. 82cm.  Or Belly Boats with similar dimensions. 

Frontnet - Stripping net for fly fishing XL - With raised edges to prevent entanglement when retrieving line
type BBM "Belly-Boat-Man"
 Mounting with loops and Velcro on top of the front bar. 
Reinforces with plastic liner.  Size LxW = . 30x40cm

 

Prachtig Collectors item - 12BB.eu Long Sleeve!!
Gemaakt van luchtig 160grs. Polyester. 

Verkrijgbaar in de maten  L en XL.

* Vraag naar de beschikbaarheid van de verschillende maten om terleurstelling te voorkomen!
 

KADOBON

Geef uw vriend, vriendin, man of vrouw, familielid, kennis of geliefde een 
fantastisch KADO - de 12BB.eu KADOBON!!!!!
Bij bestelling van de Kadobon ontvangt u een factuur op het door u opgegeven 
emailadres. U kunt de hoogte van het bedrag van de Kadobon, zelf bepalen. 
Minimale bedrag is Euro 5,00. Door het aantal te veranderen verhoogt u het
bedrag met stappen van Euro 5,00.

Het bedrag dat u overmaakt wordt gelinkt aan een unieke kadocode. Deze 
kadocode is vervolgens door de ontvanger vrij te besteden in onze Webshop. 

De kadocode ontvangt u, in het verzendbericht nadat wij u betaling hebben
ontvangen en de order hebben verwerkt. 

Uiteraard is de kadobon zonder verzendkosten; geeft u als kortingscode 
"kadobon-verzendkosten" in. 


U kunt de kadobon zelf printen - zie bijlage - na onze bevestiging kunt u het
bedrag en de kadobon code invullen voor gebruik in onze webshop. 

Scotty Ball Mounting with Side/deckmount without lock.
1 1/2" size ball.
 

12BB.eu Camera mount 
Voorzien van Scotty Gearhead mount, verlengarm, Gearheadmount 2xfemale en Scotty Cameramount.
Excl. Deckmount en Gluepad. 

Levertijd: ca. 2-4 werkdagen
 

Luxury Tube bag in XLm format. LxWxH = approx. 47x25x18cm. Equipped with extra strength for stable execution even when the bag is empty. 
The bag is equipped with a solid double zipper, which is reinforced at the end of the zipper to prevent overrunning. Further provided
of Carrying handle at the front and shoulder strap at the top. The Tube bag is attached with four Buckles to the
along the side of the bag. The Carrying Bag is equipped with the buckles male. Female buckle glue patches are available separately in our webshop. 
Distance from the Buckles on the bag is approx. 30cm. 

Furthermore, the bag is equipped with 2 extra side pockets (lockable with zipper) and a front pocket (lockable with Velcro). On top is an elastic
just for storing larger items. In short, versatile and very user-friendly bag. 

Scotty SCT-350 Rodmaster - Hengelsteun
 

12BB.eu / Velcro set
Velcro set (male / female) sewn onto a PVC strip, so that it can be glued to a PVC (Belly) boat. 
Price is per set of 1x strip hook / 1x strip eye - LxW = 44x5cm.